Setting Up a Football Field Plan in Turf Tank Control
Create the Field Plan
Open the App.
You will see the Map View.
Tap
ADD FIELD.Choose
FOOTBALLwhen prompted to select a category.Select the type of American Football field plan you wish to create (High School, NCAA, NFL, etc.).
If your field is a regulation size with no adjustments, begin here after selecting type of football field.
Field with Gooseneck Goalposts
Set Points
In Map View, tap the desired field plan to select it (it will turn green).
The Field Function menu appears. Select
PLACE.The “Choose Placement Method” options appear. Select
CORNER AND DIRECTION.You are prompted to “First Select Point on Map.”
Using the joystick on the Setting Points screen, drive the Robot to the goalpost.
Align the Center of the Rover with the crossbar (see this TIP: Align the Center of the Rover with the gooseneck crossbar.)
If you need help finding the “center of the Rover,” see the article Where is the "Center of the Rover"?
Once the Robot is in proper position, select “Center of Rover” as your registered point.
Tap the yellow indicator for that point. The indicator will turn green. That is point 1.
The App prompts you to set the next point on the map.
Drive the robot to the opposite goalpost, repeating step 5 above to align the Center of the Rover under the crossbar.
Once again, once the Robot is in proper position, select “Center of Rover” as your registered point.
Tap the yellow indicator for that point. The indicator will turn green. That is point 2.
Once both points have been set, you will see “Completed!” and a green checkmark.
Tap
SAVE.
Center the Field
Your field plan is now properly aligned, but it must be moved to place the gooseneck precisely in the center of the back endzone line.
Tap the field plan on the Map to select it and turn it green.
The Field Function menu appears. Select
MOVE.In the
MOVEmeasurements box, change “Yards” to 0. Change “Feet” to 80.Tap once on the arrow pointing in the direction you wish the field to move (the direction that will place your current Robot point in the center of the back endzone line).
On the screen, you will see that the field has shifted to the proper placement with the Robot resting in the center of the field at the back of the endzone.
Tap
SAVE.
Field with H-style Goalposts
If your H-style goalposts are not perfectly straight and aligned to the square alignment of your field plan, the back line of the end zone(s) may be slanted.
This could make one side of your endzone slightly shorter than ten yards in length, but can be prevented from impacting the primary playing area.
Please contact Support for assistance if you encounter this issue.
Set Four Points
In Map View, tap the desired field plan to select it (it will turn green).
The Field Function menu appears. Select
PLACE.The “Choose Placement Method” options appear. Select
FOUR GOALPOSTS.You are prompted to “First Select Point on Map.”
Using the joystick on the Setting Points screen, drive the Robot to the first goalpost you wish to set.
Align the screw hole between the two handholds on the front bumper of the Robot with the goalpost.
This is known as “Front of the Robot” for placement purposes.
Once the Robot is in proper position, select “Front of Robot” as your registered point.
Tap the yellow indicator for that point. The indicator will turn green. That is point 1.
The App prompts you to set the next point on the map.
Drive the Robot to the other goalpost on the same side, repeating step 5 above to align the “Front of Robot” with the post.
Once again, once the Robot is in proper position, select “Front of Robot” as your registered point.
Tap the yellow indicator for that point. The indicator will turn green. That is point 2.
Drive the Robot to the opposite endzone and set points 3 and 4 in the same manner, following steps 5 through 9.
Once all four points have been set, you will see “Completed!” and a green checkmark.
Tap
SAVE.
There is no need to center or shift the field if you set your H-style goalposts using the four points method.