Skip to main content
Skip table of contents

Pole Battery Installation

Connect the Pole Battery to the Base Station

1. Turn the Base Station upside down to display its ports.

2. Screw the Pole Battery into the threaded socket in the center.

3. Remove the protective caps from the Base Station’s charging port and the Pole Battery’s power connector.

4. Attach the power cable to both the Battery and the Base Station.

5. Align the red dot on the charger with the red dot on the Base Station.

6. Plug the charger cable into the port on the Base Station.


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.