Prepare Your Base Station
Step by Step
Unpack the red cover from the box.
Open the red cover and pull out the tripod legs.
Locate the small bag inside the pocket in the cover, and take it out.
Unscrew the 3 black lids from the bottom of the tripod legs.
Open the bag from step 3 and mount the items on the tripod legs in the following order
1. Washer 2. Bottom Spike.Find the second red cover from the crate and unpack the prism pole.
Unscrew the black lid from the top.
Place the prism pole in the middle of the tripod legs.
- Make sure the tripod legs are unfolded and standing like shown in the video. (1:22 - 1:30)
- Make sure to tighten the prism pole like shown in the video (1:22 - 1:30)Insert the fully charged batteries on the back of the base station.
- Push and hold the green buttons to open the battery lid on each side.
- 1. Locate the metal pins on the base station and the arrow icon on the top of the battery.
- 2. Point the arrow icon on the battery, towards the pins and slide the battery into place.
- 3. Place the battery cover on the back of the base station.
-- 3.1 Place the battery cover on top of the battery by pushing it until you feel a “click”.
- 4. Now insert the second battery and cover on the opposite side of the base station.Mount the base station antenna on the bottom of the Base Station.
- First unscrew the black lid.
- Screw the antenna in place (Be careful! do not overtighten it).