Skip to main content
Skip table of contents

Storage - Robot

Store the Battery

  • Remove the battery from the Robot.

  • Store the battery at 77 Fahrenheit (25 degrees Celsius) or cooler.

  • Ideally, the battery should be stored at forty to fifty-percent capacity.

Short-Term Robot Storage

  • Turn the Robot off.

  • Remove Robot battery.

  • Clean the Robot’s paint system.

  • Clean major spills from Robot body.

  • Remove the entire sprayer head assembly, including:

    • Inline mesh filter

    • Quick fan cap

    • Nozzle

    • Gasket

    • Chamber reducer / tip strainer

  • Store in a dry, frost-free environment.

Long-Term Storage

  • Follow all of the above.

  • Clean wheels and spray discs.

Returning from Long-Term Storage

  • Charge battery to full capacity.

  • Check and clean (if necessary) before reassembling Sprayer Head Assembly:

    • Inline mesh filter

    • Quick fan cap

    • Nozzle

    • Gasket

    • Chamber reducer / tip strainer

  • Test sprayer height adjustment.

  • Test spray disc width adjustment.

  • Connect the Turf Tank Control app to the Robot to check the following:

    • Paint system works with water.

    • Spray discs raise and lower.

    • Turf Tank Control app alerts when front bumper is pressed.

    • Turf Tank Control app alerts when back bumper is pressed.

    • Turf Tank Control app alerts when Emergency Stop button is pressed.

    • Check for software updates.

    • If present, update both app and Robot software.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.