Skip to main content
Skip table of contents

Installation Introduction

DO NOT ASSEMBLE OR OPERATE THE ROBOT OR BASE STATION WITHOUT EXPRESS GUIDANCE AND INSTRUCTION FROM A TRAINED TURF TANK REPRESENTATIVE.

Read and understand this Product Manual, especially the Safety chapter, before your Installation with the Turf Tank Representative. Follow the procedures in the Safety chapter at all times.

Your purchase of the Turf Tank System includes personalized installation by a trained Representative.

To ensure maximum understanding and safety, as well as to prevent potential damage to the System components, please do not attempt to use the Robot or the Base Station in any way before instructed to do so by your Turf Tank Representative.

Installation and Training Includes:

  • Charging all batteries

  • Installing the batteries

  • Verifying battery charges

  • Gathering equipment

  • Getting to know the Robot body/parts of the Robot

  • Securing compression fittings on hoses/pump/etc.

  • Loading jugs (water or paint)

  • Assembling the sprayer head

  • Priming the pump

  • Learning basic manual Robot operation

  • Determining and establishing Base Station position

  • Ensuring a good connection between the Robot and the Base Station

  • Plotting a field layout in the Turf Tank App

  • Preparing the Robot to paint the field layout

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.