Skip to main content
Skip table of contents

Adjust the Base Station Height

For optimum Base Station operation, raise it to the highest point where you can still reach its controls.

To adjust the height:

1. Open the lower column lock.

2. Extend the Prism Pole to raise the Base Station up, keeping it within arm’s reach.

Do Not extend the Base Station out of arm’s reach. Excessive height increases the possibility that the Base Station will fall and be damaged.

Excessive height also exposes the Base Station to potential high winds which can diminish the Robot’s accuracy.

3. Close the lower column lock.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.