Power On the Base Station
Attach the Base Station to the Tripod before turning on the power (see “Mount the Base Station on the Prism Pole”).
DO NOT move the Base Station with the power on.
When you connect the Base Station to the Pole Battery, all Display Panel lights will illuminate briefly. A key to the lights and what they mean appears on the Back Plate of the Base Station (directly opposite the Display Panel).
Despite the lights, the Base Station power IS NOT ON. The lights will go off after a moment.
Continue to Power On the Base Station.
Press the Power Button.

On startup, the Base Station automatically searches for a Saved Position. The orange Position light flashes to indicate the search.
Searching for a Saved Position
To search for a Saved Position at any time other than startup, press the Position button.

When the Base Station has found a Saved Position, it will:
Show a solid orange Position Light.
Show a flashing blue Transmission Light.
Emit five beeping sounds.
If the Base Station does not detect a Saved Position, it will:
Show no orange Position Light.
Show no blue Transmission Light.
Emit a five-second continuous error tone.
A Saved Position must be created before the Base Station is ready to use. Please see CREATE A SAVED POSITION.
Battery Indicator
The Battery Indicators on the Display depend on the power source in use:
If the Base Station is powered by an LP-E6 battery (internal), only the Indicator for the battery currently in use will be lit. The Base Station draws power from only one LP-E6 battery at a time.
If using only the Pole Battery (external), both Battery Indicators will be lit.
If all batteries are used together, the Base Station will use the external Pole Battery first, then will use the LP-E6 internal battery.
Both Indicators will be lit while the Base Station is using the Pole Battery.
If the Pole Battery is drained, the Indicator for the LP-E6 battery currently in use will be lit.